Zgfms-1650 High Speed Automatic Top Sheet to Bottom Sheet Flute Laminator with Pallet Feeding Pile Turner Stacker

Basic Info

Model NO.	ZGFMS-1450/1650
Membrane Material	Light Membrane
Plastic Film Mulching Modes	Cold Laminating
Performance	Waterproof
Delivery Time	30 Days
Maximum Paper	1650*1650mm
Minimum Paper	450*450mm
Down Paper Thickness	300g-10mm Thickness
Surface Paper Thickness	150g-800g
Maximum Speed	12000 PCS/Hour
Fitting Accuracy	Plus or Minus 1mm (Standard Flat Paper)
Transport Package	Vacuum Bag
Specification	CE SGS
Trademark	INNOVO
Origin	China
HS Code	8441809000
Production Capacity	20PCS/Month

Product Description

Automatic High Speed Flute Laminator With Auto Rolling-over Machine

Max.speed: 12000sheet/hour

The production line consists of a flute laminating machine and a fully automatic pile turning machine. The high speed flute laminating machine is suitable for the stick of paper and corrugated board. The motion control system is perfectly integrated with the servo correction system. Using the relative position of multiple sets of photoelectric induction paper, the servo motor on both sides of the control paper is independently compensated, and the position of the bottom paper is tracked by the paper. Make the paper and the bottom paper accurately positioned. The machine is easy to operate and simply input the size of the paper, the machine will be adjusted by itself.
The fully automatic turning machine can complete the paper stacking, saving manpower and space, and solving the problem of bending deformation after the paper is attached.

Parameters:

Model	ZGFM-1450	ZGFM-1650
Max size	1450*1450mm	1650*1650mm
Min size	450*450mm	450*450mm
Applicable paper	150-800g/m2	150-800g/m2
Bottom paper	A-F corrugated board, ≤10mm	A-F corrugated board, ≤10mm
Speed	150m/min	150m/min
Sticker accuracy	±1.5mm	±1.5mm
Power	33Kw	38kw
Machine dimension	22500*2200*2850mm	22500*2300*2850mm

BRANCH INTRODUCTION:

BOTTOM PAPER FEEDING:
Use imported Servo motor electric controlling system, with Japan NITTA suction belt to make suction power inverter, and belt cleaned by water roller, Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.

TOP SHEET FEEDING MECHANISM:
Equipped with high speed auto dedicated feeder, both paper lifting and feeding nozzle can freely adjust angle to the paper, to ensure that whether thick or thin paper can be delivered rapidly and smoothly.

ELECTRICAL SYSTEM:
Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.

PRE-STACK PART:
Pre-stack pile of paper under the condition of non-stop, improve efficiency. The special design of the pre stack paper frame, save time and effort.

 

TRANSMISSION:
With imported double teeth belt drive and Switzerland ROSTA tension device ensure the drive accurate, stable and low noisy.

 

POSITIONING SYSTEM:
The use of multiple sets of photoelectric sensor at bottom sheets relative position, control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.

 

GLUE ROLLER:
Stainless steel roller,never rust, after narrowly grinding, guaranteed the minimum amountglue coated evenly. Down roller be cleaned by water roller.

 

LEADING EDGE FEEDING SYSTEM(OPTION)
This system is for option,more suitable for large size and thick bottom sheets.

ZS1450 automatic pile turner machine

Technical parameters:

Machine model	ZSH-1450	ZSH-1650
Max paper size	1450*1450mm	1650*165mm
Min paper size	450*450mm	450*450mm
Power	8kw	8kw
Power supply	380V, 3phases	380V, 3phases
Production speed	10000pcs/hour	10000pcs/hour
Air pressure	0.65-0.85Mpa	0.65-0.85Mpa
Machine weight	About 4000KG	About 4000KG
Machine dimension	6780*2170*2850mm	6780*2370*2850mm

Machine specification:

Advantage:

1. Automatic size adjusting: With servo motor, just input the data in the touch screen, machine will adjust the size automatically.

2. Exit roller: Machine with exit roller system, it is convenient for pallet feeding.

3. Pallet feeding: With semi automatic pallet feeding unit, it is safe for worker, and it can premote working efficienty.

This fully automatic turning and stacking machine is an accessory paper product machine, which comprises a slow dilivery table, a stack of paper table, a turning talbe and a delivery table, which are sequentially connected, where in the slow feeding table and the paper feeding unit are after the paper is stacked into a stack of paper and fed into turning table. The paper stack is turned over once and then turned to the top of the turning table by the belt turning mechanism in the turning table. And then fed by the belt conveying mechanism. After the paper separation mechanism enters the top of the receiving table. Thereby achieving full automatic paper counting, paper turning and paper stacking. Paper and greatly reduce the need for manpower and effectively improve the effciency of delivery. Reduce the manual delivery intensity.

The new flip-receiver adopts a newly designed delivery bin, which completely solves the indentation caused by the collision of paper and metal in the production process of the old flip type delivery machine.

A new belt conveying mechanism was added to replace the old paper feeding mechanism, which solved the crease caused by the paepr being overweght and pushing the paper.

Machine transport and packing

__________________________________________________________________________

 

1. The packing of small machines is confirm to export wooden case standard, strong and durable. The wooden case's thickness is generally 1 cm.

2. In order to be waterproof, we usually use bubble film to wrap machine.

3. We can handle shipping for customers too.

Our Company:
_____________________________________________________________________

Certificate:
______________________________________________________________________

FAQ:
______________________________________________________________________
Q1: Are you a manufacturer?
Yes, we are specialized manufacturer of hot foil stamping machine and die cutting machine in China over 20 years.

Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of machines have in stock, please check with us before ordering.

Q3: How about installation and training?
Installation and training: If purchaser's engineer travels at own cost to China, free training session. If engineer sent to purchaser's factory, all travel cost paid by purchaser.

Q4: How about warranty?
Warranty period: 12 months from the shipping date of machine. Warranty will be not valid if machine subject to misuse or accidental damage or operator's error. During the valid time, we will supply spare parts. If you have any other questions, pls contact us and we will reply you through product's photos and videos to make every detail clear.

Why choose us?
_____________________________________________________________________
1.Our brand "INNOVO" is well-known in our domestic market and over 70 countries and territories. Europe, South America, Latin America, Southeast Asia, Middle East, Africa etc.

2.Genuine products with excellent quality. Company has always proved the 100% quality.

3.After-sales service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs. After-sales service provided engineers available to service machinery overseas.

4.Cost saving: lon-life, shock resistant and high reliability bearings with excellent quality and better performance, resulting in increased cost saving.

5.Less cost of purchase: We are the manufacturer directly.

6.Attendant customers queries promptly.